08 Toyota Tundra Reset Maintenance Light

Or reset check engine light airbag light inspection key or insp errors when maint reqd for Toyota cars.

08 toyota tundra reset maintenance light. Some intervals have changedmy 08 with the 57 used to get a service every 5K milesnow my new 57 tundra gets a look over and tire rotation every 5K miles with the oil being changed at 10K miles intervals since it has syntheticthrew me off when i took it in at 5K with the light on and they told me it didnt need an oil changelolit is nice that i have free maintenance for 2 years25K miles. Hold knob for at least 5 seconds until 000000 is displayed and light turns off. Turn your ignition off and then turn it back on.

How to Reset the Change Oil Light on a 2008 Toyota Tundra Set the odometer display on the dash to Trip A by pushing the Trip Reset button once. If the oil is changed prior to the maintenance light coming on and if the maintenance reset procedure wasnt done the light will come back on once it clocks 5000 miles from the last time it was reset usually at the last oil change. Nearly every make and model year of Toyota vehicle has the same process to reset the maintenance required light.

The Trip Reset button is located at the bottom right of the speedometer window in the dashboard. Turn the ignition to the RUN position. Push and hold down the ODO button and push the Power button twice with your foot off the brake.

ZhiYo 100 FT 14 Wire Loom Split Tubing Auto Wire Conduit Flexible Cover. Turn the key to the off position while still holding the odometer button. Today Im going to show you how to reset the maintenance required light on your Toyota Sequoia.

Wait for the system to reset. The vehicle was taken to a dealer who stated that the intake air system needed to be replaced. This is how you turn off the maintenance light on a Prius.

RECOMMENDED BY THE PEOPLES GARAGEhttpamznto1ck3B2wHow to Reset the Maintenance Req. The vehicle was not repaired. Release the trip odometer knob when Trip A is displayed again.